SL-EDED37-POE LightGate Q4 Lighting equipment controller, Siberian Lighting

Description:

SL-EDED37-POE LightGate Q4 Lighting equipment controller, Siberian Lighting

4-port ArtNet-DMX controller with built-in two-port Ethernet switch and Power-over-Ethernet power supply up to 48V.
The LightGate Q4 controller is designed to control DMX lighting fixtures via an Ethernet local area network. Four bi-directional DMX ports. Supports ArtNet v4, DMX512, DMX1024, PIXEL-SPI (4 lanes of 680 RGB pixels), RDM (coming in next firmware update).
PIXEL-SPI support allows you to connect and control LED pixels such as WS2811, WS2812, WS2812B, WS2813, WS2815, WS2818, UCS1903, UCS1904, TM1803, TM1903, TM1914, SK6812 and others. Up to 680 RGB pixels per port or 2720 RGB pixels per 4 ports can be connected to the device.
Compatible with any software and console that supports sending/receiving ArtNet packets.
The built-in two-port Ethernet switch will allow you to connect several controllers one after another, or connect two ArtNet sources (remote controls) to one controller without additional devices.
Any DMX port can be switched to input mode, which allows you to connect a fader panel and control the parameters of the lighting program using physical faders, or transmit the values of the channels of the physical DMX signal to the renderer via ArtNet.
The DMX port in output mode allows you to connect DMX lighting fixtures (Spot, Wash, Par, etc.) with a total number of control channels that do not exceed 512 per port, or 2048 channels per four DMX ports.
The "Standby Scene" function allows you to launch 1 static scene from the controller's internal memory without using an ArtNet source using a button on the front panel of the device or by sending an ArtNet macro using the DMXWorkshop utility. Recording of the "Standby Scene" is also done by pressing a button or by an ArtNet macro. In this case, the static values of the DMX channels on the DMX output ports are written to memory.
The device is powered by an external power supply from the set from mains voltage 100-240 VAC 50/60 Hz.

4 bi-directional DMX ports
Up to 16 universe ArtNet 4
Firmware LightingOS-G
Metal housing, IP30
Galvanic isolation of all DMX ports
Electrostatic protection of all DMX ports
DMX Connectors: 4x Neutrik XLR 3pin (F)
Dimensions (LxWxH): 154x107x40 mm
Net weight: 670 gr.
Packing (LxWxH): 280x250x80 mm; gross weight - 1000 gr.