SL-EDED47R LightGate R8 Lighting equipment controller, Siberian Lighting

Description:

SL-EDED47R LightGate R8 Lighting equipment controller, Siberian Lighting

The LightGate R8 controller is designed to control DMX lighting fixtures via an Ethernet local area network. Supports ArtNet v4, DMX512, PIXEL-SPI*, RDM* protocol (* - in the next firmware update). The controller is equipped with 8 bi-directional DMX ports.
The built-in two-port Ethernet switch will allow you to connect several controllers one after another, or connect two ArtNet sources (remote controls) to one controller without additional devices.
Built-in power supply from mains voltage 85-264VAC 50/60 Hz. Powercon In connector.
The design of the controller involves installation in a 19" rack, or use in a desktop version.
Compatible with any software and console that supports sending/receiving ArtNet packets.
The DMX port in input mode allows you to connect a fader panel and control the lighting program parameters using physical faders, or transfer the values of the channels of a physical DMX signal to the renderer via ArtNet.
The DMX port in output mode allows you to connect DMX lighting fixtures (Spot, Wash, Par, etc.) with a total number of control channels not exceeding 512 per port, or 4096 channels per eight DMX ports in output mode.
The "Standby Scene" function allows you to launch 1 static scene from the controller's internal memory without using an ArtNet source using a button on the front panel of the device or by sending an ArtNet macro using the DMXWorkshop utility. Recording of the "Standby Scene" is also done by pressing a button or by an ArtNet macro. In this case, the static values of the DMX channels at the DMX output ports are written to memory.

Built-in dual-port 100Mbit Ethernet switch
Eight bi-directional DMX ports
8 universe ArtNet v4
Metal housing, IP30
Galvanic isolation of all DMX ports
Electrostatic protection of DMX ports
Firmware update via Ethernet
DMX connectors: 8x Neutrik XLR 3pin (F)
Ethercon connector (Neutrik)
Power supply MeanWell 85-264VAC 50/60 Hz
Powercon In
Dimensions (LxWxH): 483x115x44mm
Net weight: 1kg.
Packing (LxWxH): 512x148x100 mm; gross weight 1.2kg.