SL-SDX4CW SplitDMX X4CW Splitter DMX512, 1xDMX in, 4xDMX-out, module WiDMX, Siberian Lighting

Description:

SL-SDX4CW SplitDMX X4CW Splitter DMX512, 1xDMX in, 4xDMX-out, module WiDMX, Siberian Lighting

4-channel DMX splitter (splitter-amplifier) with one DMX input, built-in wireless WiDMX module, galvanic isolation and surge protection for each individual DMX output. Built-in 120 Ohm terminator (shut off with a button). Input signal indication. Built-in power supply from mains voltage 85-264VAC 50/60 Hz. Powercon In+Out power connector.

The design of the device allows for various installation options: hanging on a clamp on a truss, mounting on a flat surface (wall), installing two devices in a 19" rack, installing one device in a 19" rack using the optional RackMount Kit (SL- ACP01).

The device allows splitting the signal from one DMX input into 4 separate outputs and for transmission to the wireless WiDMX module (transmitter mode). Or the wireless WiDMX module can be switched to receiver mode and the signal received over the air is split into 4 DMX outputs. Isolation provides complete galvanic isolation between inputs and outputs, and between each output. It also amplifies the DMX signal for long DMX cables between controlled fixtures.

Built-in WiDMX transceiver operates at a frequency of 2.402 - 2.480GHz, ISM, 79 channels; 20dBm; FHSS; GFSK
Radio transmission distance up to 600m line of sight;
Antenna 2dBi external, SMA connector "plug", the ability to connect a more powerful antenna to enhance signal transmission
Operating modes: transmitter, receiver, disabled

Compatible with worldwide radio protocol standards:
WIDMX Protocol
W-DMX Receive Protocol
W-DMX G3 Transmit Protocol
W-DMX G4 Transmit Protocol - Guangzhou(GZ) Protocol) (as a rule, all Aliexpress devices work only on this protocol)

The wireless WiDMX module can be disabled if not used to reduce interference with other devices.

As a compatible WiDMX receiver, it can be used in conjunction with WiDMX-01F (SL-WD01F), or as a transmitter - WiDMX-01M (SL-WD01M).

- 4 DMX outputs, 1 DMX input
- Built-in WiDMX 2.4 GHz wireless module
- Metal housing, IP30
- Galvanic isolation of each individual DMX output for power and signal (optical)
- DMX port surge protection
- Built-in 120 Ohm terminator, switchable by button
- Input signal indication
- DMX connector: Neutrik XLR-3pin
- Powercon IN connector (blue) + OUT up to 20A
- Power supply MeanWell 85-264VAC 50/60 Hz
- Overall dimensions (LxWxH): 220x104x43 mm
- Net weight - 890 gr.
- Packing (LxWxH): 280x250x80 mm, gross weight - 1300 gr

Contents of delivery:
- SplitDMX X4CW device
- Power cable
- Mounting brackets and fixing screws