NCP-2 Sculpture Compressor Effects Pedal, Nux Cherub

Description:

NCP-2 Sculpture Compressor Effects Pedal, Nux Cherub

NUX Sculpture Compressor pedal provides a constant volume level and improves signals at the upper and lower edges. When you start playing your guitar, it will clear the loud (peak) notes and increase the sustain, raising the level of the fading (quiet) notes. Sculpture also contributes to the creation of the signal base, which is fed into the rest of your effects chain.

The pedal has two modes of operation “Clean Mode” and "Clip Mode", you can switch between clean and image mode by holding the switch for 1 second.

Clean mode.
Clean mode has a wide range of limits from bottom to top, so if your guitar compresses the limits too much (like humbuckers), Clean mode is very convenient for controlling compression. You can also choose a very soft and clean compressor for guitars with single pickups.

Clip mode.
If you want to compress the signal, then in Clip mode the Sculpture pedal will make it tight and narrow, like super slim jeans. This is very well suited for single pickups to compensate for weak output.

Blend controller.
When you adjust the controls to achieve the perfect balance between trimmed frequencies and good sound, the mixing circuit allows you to adjust the level of the dry/compressor-processed signal.

True Bypass / Buffer Bypass.
Sculpture Compressor pedal has a built-in selective buffer bypass. You can change the bypass mode by turning on the power by holding the footswitch.

2 compression modes (Clean and Clip).
True Bypass / Buffer Bypass.
Mixing scheme for adjusting the transparency of the compressor.